water

Erosion Controls vs. Sediment Controls

Erosion: is the process of wind, water, or other natural agents gradually wearing down soil, rock, or land.

Sedimentation: is the process of settling or deposition of those eroded particles.

The National Pollution Discharge Elimination System (NPDES) regulates the discharge of stormwater to waterbodies within urbanized areas. The importance of regulating these discharges stems from the pollution that rainfall comes in contact with when it hits the ground. Petroleum and heavy metals deposited on roadways, fertilizers from landscaped areas, bacteria from pet waste, soil from exposed areas, and a myriad of other pollution concerns.

The technical staff at Cuyahoga SWCD excels in their mission of helping Cleveland area communities stay in compliance with their NPDES permit through the monthly inspection of active construction sites (i.e. exposed land). Our interactions with construction site personnel revolve around the implementation of an approved Stormwater Pollution Prevention Plan (SWP3).

The SWP3 details a belt & suspenders approach to limiting erosion on the site and confining any sedimentation within the site boundaries. This dual focused approach is necessary because of the inherit limitations of erosion controls and sediment controls. Erosion controls intercept raindrops before they impact the ground and dislodge the soil particles. Poorly timed installation of erosion controls could leave bare soil exposed to wind and rain. Likewise, an intense rain event could exceed the capabilities of even properly installed erosion controls. In those cases the second line of defense becomes the sediment controls. Sediment controls block and filter the muddy runoff before is leaves the site. The filtering nature of sediment controls means that even the best installations will still allow the transmission of some the smallest soil particles. Additionally, poorly maintained or damaged sediment controls can allow muddy runoff to completely bypass.

Between the two types of controls erosion controls are the most effective; the goal being to minimize erosion and keep the soil particles in place instead of having to control the subsequent muddy flows. Some examples of various types of erosion and sediment controls are listed below.

Erosion Controls

  • -vegetative stabilization (grass seed)
  • -mulching (woodchips, straw, stone)
  • -erosion control blankets
  • -tarps
  • -soil binders

Sediment Controls

  • -silt fencing
  • -compost filter socks
  • -storm drain inlet protection
  • -street sweeping
  • -sediment settling basins or traps

For more information about erosion and sediment controls or any other stormwater related questions contact Brent Eysenbach at 216.524.6580

Leave a comment